What Is The Number One Cause For Lift Truck Accidents?
What is the Number One Cause For Lift Truck Accidents?
The number one cause of lift truck accidents is operator error. This can include driving too fast, being unaware of your surroundings, and not following safety rules. The majority of these accidents involve inexperienced or untrained operators, but there are many situations that can lead to operator error.
(Looking for a Car Accident Lawyer? Contact us Today! Click here: Montag big truck accident attorney)
The most common type of injury from a forklift accident is being crushed by the forks or tipped over. These types of accidents are often fatal, and it is important to prevent them.
Another form of injury from a forklift accident can be caused by a person falling from a truck or being trapped underneath the vehicle. This is often the most severe of injuries and can result in amputation, traumatic brain injury, or death.
Other types of injuries from a forklift accident can include sprains, strains, cuts, bruises, and broken bones. These types of injuries can be particularly serious for workers who are not trained to handle these machines properly.
Insufficient Floor Marking and Warning Signs
A forklift accident can also be caused by insufficient floor markings. These markings should be visible and high enough to warn forklift drivers, pedestrians, and warehouse staff about the hazards they are facing. It is also essential that pedestrians stay out of the way and do not cross in front of a forklift.
It is also necessary for warehouse employees to wear highly visible clothing and take advantage of other safety measures such as barriers or floor tape, which can help prevent accidents. Forklifts can weigh up to 10,000 pounds, and even a minor impact from these heavy vehicles can result in serious or fatal injuries.
Improper Loading and Transport
The majority of lift truck accidents involve loading loads that are too heavy. This can happen if the load is not centered, or if it has been improperly secured with banding or shrink-wrap. It can also occur if the load is unstable or the pallets holding it are too damaged to keep it in place.
When loading a load, make sure to follow the manufacturer’s recommendations for proper loading and transporting procedures. These procedures include using a loading backrest, centering the load, placing the heaviest part near the front of the lift, and not overloading the load.
A jerky movement can also cause a load to come loose, which can lead to an accident. A loading backrest can prevent this from happening, and the operator should always pay attention to his or her surroundings.
Rollover and Tip-Over
Forklifts are not meant to be driven fast, and speeding can result in an accident. This is especially true when turning a corner, as the forklift’s center of gravity can shift to an area outside its zone of stability, increasing the risk of a rollover or tip-over.
It is also vital to follow the manufacturer’s recommended operating procedures, including setting a speed limit and not exceeding the load’s capacity. It is also important to operate only on smooth, even surfaces and to avoid turning on inclines.